R14 Asymmetrical · full lift
RELIABLE · CLEAR FLOOR TWO-POST LIFT
R14 Asymmetrical
Heavy capacity. More ways to equip your bay.
Bring 14,000 lb of lifting capacity to your shop with the R14 Asymmetrical. Three-stage arms at all four lifting positions deliver a broad reach range, while adjustable screw pads and included three-inch truck adapters add useful contact-height adjustment. Install the columns in a symmetrical or asymmetrical layout to suit your service mix, with the angled option creating more passenger-car door access through rearward vehicle positioning.
- Rated capacity
- 14,000 lb
- Front / rear arm stages
- 3 / 3
- Truck adapters
- Included
Clear-floor access. Everyday versatility.
Keep the space between the posts open for transmission jacks, tool carts and the equipment that keeps a job moving. The overhead connection carries the lift structure above the bay, leaving the floor below clear for service work.
Your shop. Your setup.
Equip your bay with the configuration that suits the vehicles you service. The same lift can be installed in either a symmetrical or asymmetrical layout, giving you two installation options without stepping into a different model.
Symmetrical configuration
Facing columns provide a traditional layout with the vehicle positioned more centrally between the posts.
Asymmetrical configuration
Columns angled 30° allow the vehicle to sit farther back, creating more room to open the doors and making entry and exit easier.
Select your configuration during installation. Each layout has different width and clearance dimensions, listed in the specifications below.
Three-stage arms front and rear
Extend your working reach with three-stage arms at all four lifting positions. The telescoping sections draw in for closer contact positions and extend when more reach is needed, giving the lift useful range across different vehicles.
Extra height. More room to work.
Four 3 in truck adapters included. These height extensions reach higher vehicle frames and help the lift arms clear running boards and nerf bars. They provide useful clearance for trucks and SUVs while keeping the pads positioned at the vehicle’s approved lifting points. Adjustable screw pads provide fine height adjustment at each contact point.
Also in the package
- 12 anchor bolts and 12 shims
Drawings & specifications
The published envelope, clearances and maximum arm reach are drawn to a common scale. Hardware outlines and arm angles are representative. Front and arm-reach reference drawings show the symmetrical layout; both installation options appear above.
- Capacity
- 14,000 lb
- Electrical supply
- 220V · single phase
- Time to full rise
- 50 sec
- Safety-lock release
- Single Point Release
- Concrete requirement
- 6" thick at 3500 psi reinforced with fiberglass or steel
- Arm stages · front / rear
- 3 / 3
- Arm / column layout
- Symmetrical / asymmetrical columns
- BOverall height
- 165 3/4 in or 153 15/16 in
- EMax. pad height, no adapters
- 74 in
- FMax. pad height, with adapters
- 80 in
- GMinimum pad height
- 4.5 in
- HFront arm reach
- 29 1/2 in–55 1/8 in
- IRear arm reach
- 37 3/8 in–70 7/8 in
- AOverall width
- Symmetrical: 160 in; Asymmetrical: 161 in
- CDrive-through clearance
- Symmetrical: 119 in; Asymmetrical: 109 in
- Inside-column spacing
- Symmetrical: 130 in; Asymmetrical: 120 in
Downloads
Useful links
Put Reliable to work.
Explore the complete two-post lineup.