R12 Baseplate · full lift
RELIABLE · BASEPLATE TWO-POST LIFT
R12 Baseplate
12,000 lb capacity. Baseplate simplicity.
The R12 Baseplate moves up to a 12,000 lb rating in an open-top, floor-bridge configuration. Three-stage arms at both ends provide extended positioning range, and included truck adapters help meet taller frame heights. It is the baseplate option for shops that need greater rated capacity and arm reach in a layout without an overhead bar.
- Rated capacity
- 12,000 lb
- Front / rear arm stages
- 3 / 3
- Truck adapters
- Included
Built for an open-top bay
A floor-level bridge joins the columns while keeping their tops clear. It suits shops that prefer a baseplate layout and do not need an overhead connection.
Three-stage arms front and rear
Extend your working reach with three-stage arms at all four lifting positions. The telescoping sections draw in for closer contact positions and extend when more reach is needed, giving the lift useful range across different vehicles.
Extra height. More room to work.
One 3 in truck-adapter set listed; confirm the supplied version. These height extensions reach higher vehicle frames and help the lift arms clear running boards and nerf bars. They provide useful clearance for trucks and SUVs while keeping the pads positioned at the vehicle’s approved lifting points. The supplied pads and adapters work together to reach the vehicle at the required contact height.
Also in the package
- 10 anchor bolts and 10 shims
Drawings & specifications
The published envelope, clearances and maximum arm reach are drawn to a common scale. Hardware outlines and arm angles are representative.
- Capacity
- 12,000 lb
- Electrical supply
- 220V · single phase
- Time to full rise
- 50 sec
- Safety-lock release
- Single Point Release
- Concrete requirement
- 6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below)
- Arm stages · front / rear
- 3 / 3
- Arm / column layout
- Symmetrical arms
- AOverall width
- 157 9/16 in
- BOverall height
- 124 7/16 in
- CDrive-through clearance
- 114 in
- EMax. pad height, no adapters
- 71 11/16 in
- FMax. pad height, with adapters
- 74 11/16 in
- GMinimum pad height
- 4 3/8 in
- HFront arm reach
- 37 7/16 in–59 1/16 in
- IRear arm reach
- 37 7/16 in–59 1/16 in
Downloads
Useful links
Put Reliable to work.
Explore the complete two-post lineup.