Shared AP-9H/AP-9H-XLT gallery photo; standard AP-9H shown. See XLT specifications for its dimensions.

Four-post parking lift

4P9XLT Storage

A longer platform with the same high-lift layout.

A 9,000 lb parking lift with longer and wider runways than the standard 4P9S. It retains the same listed raised height and under-runway clearance, with a larger floor footprint.

Capacity: 9,000 lb
Power supply: 110V
Overall height: 98 in

$4,469Preview price · free freight shipping*

Model sales sheet ↗Compare four-post models ↗

Final availability, package and order coverage confirmed before purchase.

THE RIGHT CONFIGURATION

A longer platform with the same high-lift layout.

For stacked parking, the useful space is the clearance below the runways and the room above the upper vehicle. Column height or maximum lift height alone does not show whether two particular vehicles will fit. Include the doors, tracks and usable lock positions in the plan.

Plan the usable space.

Runway length does not establish a full-capacity wheelbase limit. Confirm tire placement, allowed loading and raised clearances for the actual vehicles.

DRAWINGS & DIMENSIONS

The measurements that matter.

Match red letters to the specifications. Tap a drawing to enlarge it.

Published front envelopes are drawn to scale. Shared drawing keys use simplified hardware; front and plan references may show another model. See the supplied manual for model-specific installation details.

Capacity: 9,000 lb
Electrical supply: 110V · single phase
Time to full rise: 50 sec
Safety-lock release: Manual single-point safety-lock lever
AOverall width: 118 in
BLength with ramps: 230 13/16 in
Length without ramps: 198 9/16 in
COverall height: 98 in
DDrive-through clearance: 98 in
ERunway length: 189 in
FRunway width, each: 20 in
GInside runway gap: 38 in
HMax. runway-top height: 86 in
IClearance below runway: 81 in
JMinimum runway height: 5 1/8 in
KApproach ramp length: 36 13/16 in

198 9/16in without ramps /230 13/16in with ramps (supplier drawing); listing rounds body to199in.

Equipment dimensions are reference values, not minimum installation clearances. Complete footprint dimensions are shown only where the supplier establishes their endpoints.

BUILD YOUR SETUP