
Available option
Air-operated 4,000 lb rolling / sliding bridge jack
Raises one end of a vehicle above the runways for wheel and brake service. Requires a compatible compressed-air supply.
See details ↗Shared HW-8S/HW-8SXLT full-lift gallery illustration.
Four-post parking lift
A compact starting point for garage storage.
An 8,000 lb drive-on lift for parking and storage. Its standard-length runways and lower column height make it a useful starting point when comparing a smaller garage bay. Check tire placement and raised vehicle clearance before choosing.
Final availability, package and order coverage confirmed before purchase.
THE RIGHT CONFIGURATION
For stacked parking, the useful space is the clearance below the runways and the room above the upper vehicle. Column height or maximum lift height alone does not show whether two particular vehicles will fit. Include the doors, tracks and usable lock positions in the plan.
Runway length does not establish a full-capacity wheelbase limit. Confirm tire placement, allowed loading and raised clearances for the actual vehicles.
DRAWINGS & DIMENSIONS
Match red letters to the specifications. Tap a drawing to enlarge it.
Published front envelopes are drawn to scale. Shared drawing keys use simplified hardware; front and plan references may show another model. See the supplied manual for model-specific installation details.
Overall length178in listed. Ramp-inclusive footprint: confirm supplied ramp configuration. Drawing reference:178½in without /208¼in with ramps.
Equipment dimensions are reference values, not minimum installation clearances. Complete footprint dimensions are shown only where the supplier establishes their endpoints.
BUILD YOUR SETUP

Available option
Raises one end of a vehicle above the runways for wheel and brake service. Requires a compatible compressed-air supply.
See details ↗

Included
Provides a tray between the runways for a separate suitable jack.
See details ↗
Included
Model-matched 36 or 45 inch removable ramps. A longer approach can help with low-clearance vehicles; check the actual entry geometry.
See details ↗Use the matching model and fit dimensions. Accessories are not universally interchangeable.
KEEP THE DETAILS
Compare the job, the footprint and the configuration before choosing.