Supplier full-lift configuration.
Four-post alignment lift
4P11A Alignment
A four-post platform built around alignment work.
An 11,000 lb alignment lift with turn plates, rear sliding plates and pneumatic lock release. Choose this layout for alignment and service work; its features and installation needs differ from the parking models.
- Capacity
- 11,000 lb
- Power supply
- 220V
- Overall height
- 87 1/2 in
Final availability, package and order coverage confirmed before purchase.
THE RIGHT CONFIGURATION
A four-post platform built around alignment work.
Turn plates and rear sliding plates support an alignment workflow. The included rolling jack adds wheels-free access for appropriate service tasks. Installation requires the correct electrical and air supplies for the delivered equipment.
Plan the usable space.
Runway length does not establish a full-capacity wheelbase limit. Confirm tire placement, allowed loading and raised clearances for the actual vehicles.
DRAWINGS & DIMENSIONS
The measurements that matter.
Match red letters to the specifications. Tap a drawing to enlarge it.
Published front envelopes are drawn to scale. Shared drawing keys use simplified hardware; front and plan references may show another model. See the supplied manual for model-specific installation details.
- Capacity
- 11,000 lb
- Electrical supply
- 220V · single phase
- Time to full rise
- 60 sec
- Safety-lock release
- Air-operated pneumatic safety-lock release
- AOverall width
- 130 in
- BLength with ramps
- ≈ 229.33 in
- Length without ramps
- ≈ 205.12 in
- COverall height
- 87 1/2 in
- ERunway length
- 196 in
- FRunway width, each
- 23 in
- GInside runway gap
- 34 1/2 in
- HMax. runway-top height
- 72 in
- IClearance below runway
- 67 in
- JMinimum runway height
- ≈ 7.09 in
5210mm(205.1in) without /5825mm(229.3in) with ramps (manual); listing rounds full length to230in.
Equipment dimensions are reference values, not minimum installation clearances. Complete footprint dimensions are shown only where the supplier establishes their endpoints.
BUILD YOUR SETUP
Included with this model.
- 2 alignment turn plates
- 1 6000lb rolling jack
- 2 approach ramps
KEEP THE DETAILS
Downloads
Useful links
See the rest of the four-post lineup.
Compare the job, the footprint and the configuration before choosing.